SailNet Community - View Single Post - Can Be a Big Job - Support Board
View Single Post
Old 05-20-2007
Freesail99's Avatar
Freesail99 Freesail99 is offline
Senior Member
Join Date: Feb 2006
Location: New Jersey
Posts: 4,507
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 10
Freesail99 will become famous soon enough
Send a message via Yahoo to Freesail99
Originally Posted by DeepFrz
I don't see any reason that you couldn't cut out the rotted area and scarf in a piece of wood to replace the area cut out. If I were doing it I would sand everything back to good wood and then coat the wood with several coats of epoxy resin, perhaps even adding several layers of fiberglass cloth to the top. Make sure there is no rot back where the shelf joins the bulkhead.

That is my plan. I was even to drill some holes and fill the boards with epoxy to add strenth between the boards. Thanks
S/V Scheherazade
I had a dream, I was sailing, I was happy, I was even smiling. Then I looked down and saw that I was on a multi-hull and woke up suddenly in a cold sweat.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook