Join Date: Feb 2006
Location: New Jersey
Thanked 0 Times in 0 Posts
Rep Power: 10
I don't know how far back the rot or wet wood goes. But it may be possible to remove the wet/rotten plywood and put thicken epoxy back between the fibeglass panels. You may want to try and dry out the area before injecting epoxy into it. A heat gun may work. After that sets up you want to rebed the hatch using silaflex or 3m 4200.
I had a dream, I was sailing, I was happy, I was even smiling. Then I looked down and saw that I was on a multi-hull and woke up suddenly in a cold sweat.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.