SailNet Community - View Single Post - Glassed in keel bolts
View Single Post
  #8  
Old 06-18-2007
mpraca's Avatar
mpraca mpraca is offline
Zingaro
 
Join Date: May 2001
Location: San Rafael, CA
Posts: 63
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 14
mpraca is on a distinguished road
Quote:
Originally Posted by Gene T
I don't understand the cardboard thing. I would think a bead of caulking around the outside and inside seam would seal it. Could treat the pocket in the keel with epoxy. I don't see any need to treat the keel bolts, although they could be sealed too.

What yard are you in? I might be able to meet you there and help come up with some ideas. I am planning on buying a Jeanneau so I am interested in their issues.
Thanks for your interest, but this was a few weeks ago. The boat is back in the water. For clarity this picture is from two years ago. Back then I sealed the joint with 3M 5200 and that part was good after two years. I think I have pictures of the work being done this year but unfortunately I haven't been able to find them. I'll come back if I find them.
Reply With Quote Share with Facebook