SailNet Community - View Single Post - Need Tips on Interior Mold
View Single Post
  #7  
Old 05-24-2002
MaryBeth MaryBeth is offline
Senior Member
 
Join Date: May 2002
Posts: 159
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 14
MaryBeth is on a distinguished road
Need Tips on Interior Mold


Use Starbrite Mildew remover, much easier to handle than Clorox. Just be sure to rinse well, especially along the seams. This can be used on any vinyl or fiberglass surface. If colored, of course test for color fastness in a corner. If this is a boat that has sat for a while untended, the spots you see may not be just mildew but, I now it''s gross, spider poop. The Starbrite Mildew remover will take care of this, too. From experience, the Starbrite is much easier to use in as big a task as this than Clorox is. Still, you will need lots of ventilation. Do a small spot at a time. Don''t get down there and spray all over, please.

Best of luck,
MaryBeth
Reply With Quote Share with Facebook