SailNet Community - View Single Post - Another Rigging Question
View Single Post
Old 06-21-2007
rhaley rhaley is offline
Join Date: Jun 2007
Posts: 91
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 8
rhaley is on a distinguished road
I re-rigged ou boat this winter and did all the standing rigging myself. I had each shroud made about a foot and a half longer than required with a swaged terminal at the masthead/spreader fitting and no fitting on the other end. Then I ordered Hayn Hi-Mod terminals and did all the measuring, cutting and terminal fitting myself. The process was easier than I expected and I wouldn't hesitate to do it the same way again.

As far as running rigging, I replaced everything with all line and did the splicing myself as well.
Reply With Quote Share with Facebook