Originally Posted by rhaley
I re-rigged ou boat this winter and did all the standing rigging myself. I had each shroud made about a foot and a half longer than required with a swaged terminal at the masthead/spreader fitting and no fitting on the other end. Then I ordered Hayn Hi-Mod terminals and did all the measuring, cutting and terminal fitting myself. The process was easier than I expected and I wouldn't hesitate to do it the same way again.
As far as running rigging, I replaced everything with all line and did the splicing myself as well.
Well done, and welcome aboard.
hunter Legend 37 Semper Paratus
Formerly - Tartan 34C Yawl