View Single Post
  #2 (permalink)  
Old 07-09-2007
sailingdog's Avatar
sailingdog sailingdog is offline
Telstar 28
 
Join Date: Mar 2006
Location: New England
Posts: 35,475
Rep Power: 7
sailingdog is just really nicesailingdog is just really nicesailingdog is just really nicesailingdog is just really nice
You can probably scarf in a new piece of the extrusion that holds the rub rail in place, by lifting the teak toe rail a bit. The rub rail you can probably buy from a couple of different manufacturers. Taco Marine makes replacement rub rail in a variety of shapes.

I would highly recommend you check the deck and hull very carefully, as there may be some damage to the hull deck join.. .and that means it will leak.
__________________
Sailingdog

Telstar 28
New England

You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.

—Cpt. Mal Reynolds, Serenity (edited)

If you're new to the Sailnet Forums... please read this POST.

Still—DON'T READ THAT POST AGAIN.

Last edited by sailingdog : 07-09-2007 at 02:06 PM.
Reply With Quote