SailNet Community - View Single Post - Engin Knock
Thread: Engin Knock
View Single Post
Old 07-09-2007
cardiacpaul cardiacpaul is offline
Senior Member
Join Date: Jun 2006
Posts: 2,394
Thanks: 0
Thanked 1 Time in 1 Post
Rep Power: 11
cardiacpaul is a jewel in the rough cardiacpaul is a jewel in the rough cardiacpaul is a jewel in the rough
Rings: Made by Hastings Part # 6520-std,or 6520-10,-20,-30 for oversize for larger pistons Price U$ 30.00/set
Main Bearings: Made by Federal Mogul Part # 5140M-std,or 5140M10,20,30 for oversize after grinding. Price U$ 120.00 for the set for both bearings
Rod Bearings: Made by Federal Mogul Part# 3875SB-std, or 3875SB-10,-20,-30 for oversize after grinding Price U$ 14.00
having the machine shop fit the rings, and the bearings, turn the crank, valve job, face, and install head about 800.00 labor
gasket set about 100.00
new thermostat 140.00 (use the moyer one)
rebuild kit for carb, 20.00
tune up parts, less than 50.00.
done like dinner.
We are not primarily on earth to see through one another, but to see one another through

Some people are like slinkies: not really good for anything... but you can't help laughing when you push them down the stairs

Last edited by cardiacpaul; 07-09-2007 at 09:57 PM.
Reply With Quote Share with Facebook