SailNet Community - View Single Post - Failed manual bilge pump
View Single Post
  #2  
Old 03-20-2014
chuckbauer chuckbauer is offline
Junior Member
 
Join Date: Jan 2008
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
chuckbauer is on a distinguished road
Re: Failed manual bilge pump

Andrew, had the same pump on my IP 26 MK II which also failed. I could find no direct replacement so went with something like a Whale Compac 50.
No at the boat until this weekend so not sure of exact model. It fit ok except the bolt holes were different so had to do a little filling/patching.

It is mounted on the starboard side of the cockpit maybe a foot forward of the locker.

Defender has them. If I run across the paper work I'll post the exact mode.

Good luck.

Chuck Bauer
Etude, IP 26 MK II Hull 78
Reply With Quote Share with Facebook