SailNet Community - View Single Post - Ideal boarding ladder
View Single Post
  #6  
Old 06-22-2002
rmiille rmiille is offline
Junior Member
 
Join Date: Dec 2001
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
rmiille is on a distinguished road
Ideal boarding ladder

I have a 28'' southercross that has about 23" of free board. I saw a boarding ladder in the west marine catalogue model #584427, around $150. I cut about 1 and 1/2 inches of the end of the ladder, made two small
u-brackets and fassened them to the top of my gunnal, used a 3"X 1/8" X 17" piece of stainless steel under the brackets to distribute weight. I drilled a hole in the ends of the ladder about 1" from the end I had cut off. The ladder swivels from the up position, tied with a slip knot to a life line, when flipped over the side to the down position it has two steps under water. The whole project cost $155 and 1 hour of work. It is working great as a universal boarding ladder and is out of the way on the outside of the life lines.
Reply With Quote Share with Facebook