SailNet Community - View Single Post - Electrolysis / Keel stepped mast
View Single Post
  #9  
Old 01-19-2001
munchimike munchimike is offline
Member
 
Join Date: Jan 2001
Posts: 33
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
munchimike is on a distinguished road
Electrolysis / Keel stepped mast

AHOY!!! Treat your mast step like any other marine installation; forget trying to keep it dry....deal withit.Zinc chromate two part primer, drain holes in step, them bed the entire thing in Dolphinite till it squishes out all over the place, grounding plates from your chain plates to the keel bolts on the outside of the hull.......not in the bilge...Rev. Mike
Reply With Quote Share with Facebook