SailNet Community - View Single Post - Bristol 32 head floor
View Single Post
post #2 of Old 04-07-2014
Delta-T
Senior Member
 
Delta-T's Avatar
 
Join Date: Oct 2013
Posts: 530
Thanks: 34
Thanked 40 Times in 35 Posts
Rep Power: 2
 
Re: Bristol 32 head floor

Hi Jim, can you take the strainer off and take a close up picture/ I don't have a shower in my boat so that is not something I have done. On my boat many things were installed and the boat built around it. I do know home shower drains, and they can be removed and replaced from the top, inside the shower with a special tool. Tool is a cheap little piece of metal that comes with the new fitting. Here is a setup you might have. See the caulking nut can be removed, and pipe is held water tight with the gasket. http://www.vizimac.com/shower-drain-...re-template-3/

Good luck,
Eric

Eric
Delta-T
1968 Bristol 32 Keel/Crb Hull 26
Narragansett Bay RI USA
Delta-T is offline  
Quote Share with Facebook
 
 
For the best viewing experience please update your browser to Google Chrome