SailNet Community - View Single Post - Anchor rode question
View Single Post
post #24 of Old 08-06-2007
sailingdog
Telstar 28
 
sailingdog's Avatar
 
Join Date: Mar 2006
Location: New England
Posts: 43,290
Thanks: 0
Thanked 14 Times in 12 Posts
Rep Power: 14
         
IIRC, the Fortress and Danforths don't necessarily work well with all-chain or a lot of chain, especially in a soft bottom. IIRC, Fortress recommends a rode with 6-10' of chain, rather than all chain. From the Fortress website:

Quote:
Use three-strand nylon rope, 6-12 ft (2-4 m) of chain and a minimum of 5:1 scope. Also, a minimum of 6 ft (2 m) of chain should be used for every 25 ft (8 m) of water depth. For storm conditions use an anchor one or two sizes larger.


Not many people I know anchor in water much deeper than 25'... IIRC, the anchor will have trouble setting properly with too much chain.

Sailingdog

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Telstar 28
New England

You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.

—Cpt. Mal Reynolds, Serenity (edited)

If you're new to the Sailnet Forums... please read this
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
.

Still—DON'T READ THAT POST AGAIN.
sailingdog is offline  
Quote Share with Facebook
 
 
For the best viewing experience please update your browser to Google Chrome