|
Keeping the electrical connections out of the bilge as much as possible is a good idea in general. If you do have to make electrical connections inside the bilge, either seal them with the adhesive-lined heat-shrink tubing as TB has suggested, or use the liquid tape electrical sealant to seal them.
__________________
Sailingdog
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Telstar 28
New England
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts..
Still—DON'T READ THAT POST AGAIN.
|