Daniel - Norsea 27
Join Date: Apr 2012
Location: Me: VA Boat: TN
Thanked 31 Times in 26 Posts
Rep Power: 4
Re: 1st big project, bronze thru-hull
I used G10 for the base too. I didn't use studs, nor did I use bolts through the hull.
I drilled through the bolt holes, then drilled a little larger area for the bolt heads so they would be recessed into the G10 plate.
Next time I haul out, I will have 6 or 7 more to replace and plan to install the same way. MaineSail's instructions were great help.
1981 Nor'sea 27, To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
“Who is staring at the sea is already sailing a little.”