Living the dream
Join Date: May 2008
Location: Mackay Qld AU
Thanked 14 Times in 13 Posts
Rep Power: 8
Re: Bedding Deck Hardware With Butyl Tape
I had a look at their site and found a 'black Butyl Flashing Tape'. Is this what you used for your hatch? Was the process the same as described in this post? I'm installing a deck hatch in the near future and want to get it right! Thanks again
No it wasn't that one. It's this one:
Double Sided White Butly Tape
It's available in black also on the site.
I used the same processes as described in this thread. I doubled it over or applied two layers for the stuff that mounted over non skid, otherwise used a single layer. The stuff is more light grey than white, and is like a firm blu-tac. It has a fine nylon mesh matrix and trims easily with scissors.
Last edited by ReefMagnet; 05-12-2014 at 05:27 PM.