SailNet Community - View Single Post - Cetol Marine Finish Woes
View Single Post
  #27  
Old 05-25-2014
lennyv lennyv is offline
Junior Member
 
Join Date: May 2012
Posts: 6
Thanks: 0
Thanked 1 Time in 1 Post
Rep Power: 0
lennyv is on a distinguished road
Re: Cetol Marine Finish Woes

Try wiping the wood with acetone before applying the cetol. It will remove moisture from the wood. Also let the cetol breathe a few moments in the shade after stirring. I use cetol with a foam brush and put it on as thin as possible. A few thin coats are better than 1 thick coat. Good luck
Reply With Quote Share with Facebook