View Single Post
  #9 (permalink)  
Old 09-05-2007
danjarch's Avatar
danjarch danjarch is offline
Boat less in Texas
 
Join Date: Jun 2007
Location: Grapevine TX
Posts: 641
Rep Power: 2
danjarch is on a distinguished road
The main sail on the Liberty Clipper was something like 800 square feet. We didn't have cam cleats or winches. On all the boats I worked on, you were never allowed to put a hitch in any halyard, sheet, or falls. It was considered poor seamanship. I will say that I still don't use hitches on my own boat very often. If you need to have two lines on a small cleat, I geuss you'd have to hitch them off. We used the slippery hitch for the falls on one boat I sailed on, but I can't remember why.
__________________
!! WARNING !! The above information is to be used by intelligent people only. If you are Stupid, could be considered a moron, or otherwise. You are instructed to disregard this information and seek the help of a licensed and bonded professional.
Reply With Quote