SailNet Community - View Single Post - making & installing an asymetrical sprit
View Single Post
  #2  
Old 09-05-2002
capnjim02 capnjim02 is offline
Member
 
Join Date: Jul 2002
Posts: 68
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 12
capnjim02 is on a distinguished road
making & installing an asymetrical sprit

I have been working on one for my O''Day 30.
at present I have installed a fitting ahead of my head stay to tack in front of headstay. At present there doesn''t seem to be much info around on the subject. I have found that on the new Dehler 36 they have a removable carbon fiber pole which is slide through a ring attached to the bow stem and then attached to a spin pole type chock on the deck. a friend of mine has one and I plan to check it out further this even after our thurs night racing. I have found some info on the mini-transat site. these are very extreme poles but some modifications to these systems I think might work. this weekend I plan to run some comparisions with and without sprit as to speed differances. I''ll let you know what I''ve found.
Reply With Quote Share with Facebook