|
Ah Max..
Having seen the inside of the keel stub during the process I think I speak from experience. The bottom layer of glass was barely perhaps 3/8 thick and the bilge side covering the plywood not even a 1/4 inch. Trust me my keel bolts were sinking into the bilge as the plywood compressed..
__________________
______
-Maine Sail / CS-36T
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
© Images In Posts Property of Compass Marine Inc.
Last edited by Maine Sail; 01-10-2008 at 09:07 AM.
|