If you do as Frank suggests, use either MAS Epoxy
or don't let it cure completely, and add the additional layers while the previous ones are still tacky to the touch or you'll have to wait for it to cure and remove the amine blush. If you don't remove the amine blush, the layers won't bond to each other very well. MAS epoxies are formulated not to have an amine blush IIRC.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.