Join Date: Mar 2006
Location: New England
Thanked 17 Times in 13 Posts
Rep Power: 15
Another way to do it is to use a rotary saw, like the RotoZip. It cuts laminate pretty well and allows you to make curves and tight corners better than a standard sabre saw does. It also requires less clearance to make curved cuts than a sabre saw usually does.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.