|
Delaminated Rudder
I would cut the hand sized piece of the shell right out with something like a Dremel tool. This will allow you to see what the core material is and what kind of shape it is in much better than drilling holes.
You can then repair it with some epoxy and glass for a smooth strong repair.
A rudder is no place for a mere cosmetic repair, it must be strong to withstand the stresses of steering and smooth to prevent turbulence.
If you go to West System''s website and email them your question you should get a prompt reply on how to procede from an expert (which I am not)
Good Luck.
|