SailNet Community - View Single Post - The WTF challenge!
View Single Post
  #5  
Old 08-15-2014
christian.hess's Avatar
christian.hess christian.hess is offline
"Nubile Southern Sailor"
 
Join Date: Sep 2013
Location: Columbus, Ga
Posts: 3,834
Thanks: 102
Thanked 152 Times in 148 Posts
Rep Power: 2
christian.hess is on a distinguished road
Re: The WTF challenge!

Quote:
Originally Posted by Jaramaz View Post
Med,

My symphaties!

You should use a knocking machine Not sure what the name is in english, but a machine that knocks at the same time as it turns the screw.
Such are sometimes used when chaning tyres, something I do twice a year.

Prior to attacing you should apply copious amounts of oil or whatever. It always helps, at least somewhat.
If you can, try to apply some heat (you can) and some cold (ice, frozen Nitrogen) in order to get the metall to expand and contract. This should be repeated many times. And oil, did I say that?

With this, I succeeded to remove stainless screws in Alu, that had been out-door for 25 years.

Worth a try.


Best of luck

J
they call those tools iimpact driver down here
__________________
Finally sailed!!!!!!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Islander 36 refit still going on...

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook