I would use silicon bronze screws, but you could probably get away with using stainless steel acorn nuts on the interior, especially if you use TefGel or LanOcote to prevent galvanic corrosion issues. The interior should be dry... so the real dangers of galvanic corrosion are minimal—unless you've done a really lousy job of installing the ports.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.