SailNet Community - View Single Post - 8.3 Keel Attachment
View Single Post
  #1  
Old 12-03-2007
pnwardwell pnwardwell is offline
Junior Member
 
Join Date: Dec 2002
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
pnwardwell is on a distinguished road
8.3 Keel Attachment

There has been no keel leakage on my 1979, 8.3 for the past 8 years. After a grounding this summer, I noticed more water in the bilge than before. On haul out, water in the bilge trickled out of the keel seam.

The seam gap now is about the same as before the grounding. There has always been a large gap at the stern end of the seam. it is tight to the stump in the middle 2/3 and then a small gap towards the bow.

I checked the keel bolt nuts and they were all loose. Tighter than snug, but not much.

Questions: 1. Does anyone have a torque value for the keel nuts? 2. I have to believe water has freely moved into the gaps for many years. Does this represent a problem? 3. If I were to drop the keel this spring, how would re-seat the keel? There would have to be major filling and leveling work to make for a tight fit along the entire length of the seam.

Greatly appreciate your thoughts.
Reply With Quote Share with Facebook