Some expressed interest in the Niccollslite NN-10 nesting dinghy I ordered made from Barry Niccolls in British Columbia.
It arrived last week and now that I am recovering from a nasty head cold, I decided to put it together in the garage.
It is a relatively simple operation. The whole boat weighs under 100 lbs., and both ends can float by themselves. Four large screw-in fasteners do the trick, and the two pieces more or less "click" together under a fibreglass lip. I have a three-piece mast, and a main and jib, as well, but as it's taller at roughly 5 metres than my garage ceiling, I've left it packed until I go sailing.
As you can see in the pictures, it has a centreboard with sail controls mounted, bronze tholeplates, several small cleats and a nice kick-up rudder and sturdy tiller. I suspect I will sew bags so I can lash all these pieces into the nested boat.
It's easy for me to handle: in fact I attempted to walk it home using a hand truck (I don't own a car), but my cold was rotten so I ordered a taxi van and stuffed it in the back.