SailNet Community - View Single Post - laguna 30 rudder bearings
View Single Post
post #3 of Old 01-10-2008 Thread Starter
charlescarl
Junior Member
 
Join Date: Apr 2007
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
 
Ruffer bearings

Just in case any one else has a laguna 30, (and a little late ), here is my fix for the sloppy bearings, which turned out to be a lower and an upper tube sleeve lined with a teflon like liner. The rudder came out easily, and I found that the upper sleeve was worn just where the sleeve is bonded to the cockpit sole,(auxiliary rudder point). I purchased a 12x12inch x 1/32 inch,sheet of teflon etched on one side, and repaired the upper edge of the upper sleeve with a glue supplied. One full season with lots of sailing, and the repair is still good
charlescarl is offline  
Quote Share with Facebook
 
 
For the best viewing experience please update your browser to Google Chrome