SailNet Community - View Single Post - Roller furling main locks when reefing
View Single Post
  #1  
Old 02-12-2003
RFranco RFranco is offline
Junior Member
 
Join Date: Nov 2002
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
RFranco is on a distinguished road
Roller furling main locks when reefing

I have a Z-Spars roller furling main mast in my 1995 Beneteau Oceanis 440. When I reef it (or roll it into the mast) in stronger winds, there is a tendency, after a while sailing with the reefed sail, for the sail to come partially out of the mast''s track and to get stuck (will not roll in or out). What am I doing wrong? Should I put more resistance in the clew''s outhaul when rolling in the sail so that it rolls in tighter and without any slack around the foil? Doesn''t this put too much strain in the system? Any help would be greatly appreciated since it is quite annoying to have a sail stuck in the mast when the wind is picking up.
Reply With Quote Share with Facebook