The shank on the Rocna is fairly deep, much more so than the Bruce you've got on in this photo. The reason I think is due to the incredible holding power of the Rocna. You'll definitely have to remove the forward pin. It might squeak under that top pin, but it depends a bit on whether you're planning on getting the 20 kg or 25 kg Rocna.
Quote:
Originally Posted by labatt
Here's my roller with a Bruce in it... it now has a Delta, which lines up perfectly to pin to the roller when stored. Not knowing the shank shape of the Rocna, any thoughts?
 |
__________________
Sailingdog
Telstar 28
New England
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this
POST.
Still—DON'T READ THAT POST AGAIN.