|
Here's a picture
of the bilge that runs from the mast step ( right at the top of the picture is the mast step tunnel )most of the length of the boat ,into the engine compartment to the shaft tube.
You can see the keel bolts there are 18 of them and yes they are SS.
The bonding plate bolts are barly visibal to the far left edge of the sole hatch cut out on the left side,( second picture ) there is no backing plate, will be changing that!!
Oh by the way another cncern is thoes are my fuel tanks on both sides of the bilge , Im standing on the starboard tank.( Fiberglass )
Last edited by Stillraining; 01-18-2008 at 11:20 PM.
|