SailNet Community - View Single Post - Marine plywood
Thread: Marine plywood
View Single Post
  #5  
Old 01-26-2008
JohnRPollard's Avatar
JohnRPollard JohnRPollard is offline
Moderator
 
Join Date: Mar 2007
Location: Chesapeake
Posts: 5,680
Thanks: 0
Thanked 2 Times in 2 Posts
Rep Power: 10
JohnRPollard is a jewel in the rough JohnRPollard is a jewel in the rough JohnRPollard is a jewel in the rough
Sealing the edges is a good suggestion, but if possible, I would recommend coating the entire replacement panel (edges and sides) with epoxy. Additionally, primer and paint will offer some extra protection to the epoxy, from abrasion and engine heat (doesn't sound like UV will be an issue.)
Reply With Quote Share with Facebook