[mlubel]

Been using Behr #6 on in/out teak for maybe 10 or 11 years... start with raw teak (no finish... sanded) apply Behr #6 tung oil generously... leave on for period of time... if wood asorbs... then reapply and let alone for another period of time (period of time = maybe 20-30 minutes)... after application wipe wood with toweling to finish you desire... some areas of interior are buffed with machine to higher gloss. Re apply as needed... no paint brushes... no tapeing... basically treat as any good wood at home. BEHR #6 TUNG OIL is the SECRET. I constantly get complements and I am not one who likes to maintain brightwork. I prefer mechanical and electronics.