Also, ratcheting crimpers tend to give a much more consistent crimp, since the jaws won't release until the crimp reaches a set point.
Unfortunately, that crimper you use is NOT designed and is NOT intended for use on insulated terminals such as those made by Ancor. That tool is for NON-INSULATED terminals... Just a heads up...
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.