You should probably look at the bluesky or outback sites.
Since you appear to be unable to research this yourself... the Outback Charge MX60 user manual
says the MPP adjustment interval has a default setting of THREE MINUTES
In the Sweep Interval screen, press the <-MIN> soft key
to adjust the sweep interval from 03 minutes (default)
to 00 minutes. Press the soft key until the MPPT
Mode screen appears.
The Blue Sky 2000E MPPT charge controller manual
says the following:
Solar Boost 2000 continually recalculates the maximum power voltage as operating conditions change.
This is basically what I said previously, as well as what the page I pointed you to said.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.