SailNet Community - View Single Post - Pearson Mast Step
View Single Post
post #1 of Old 05-10-2003 Thread Starter
Join Date: Nov 2000
Posts: 71
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 17
Pearson Mast Step

I need to remove 3 inches from the bottom of my mast because of corrosion.
The step looks ok, but need to be built up by the 3 inches I am taking off.
The question is.... what would be a suitable material to use under the step. This is a Pearson 424. I am thinking, 3 pieces of 1 inch Laminated marine Plywood coated in WEST System Epoxy. The step does not sit in Bilge water.
aphil138 is offline  
Quote Share with Facebook
For the best viewing experience please update your browser to Google Chrome