SailNet Community - View Single Post - How to patch a 3/16 inch holes with glass mat
View Single Post
  #1  
Old 04-08-2008
saurav16's Avatar
saurav16 saurav16 is offline
Senior Member
 
Join Date: Mar 2007
Location: NY
Posts: 312
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 8
saurav16 is on a distinguished road
Send a message via AIM to saurav16
How to patch a 3/16 inch holes with glass mat

I am drying out my rudder: I have drilled 3/16" holes in it about six inches apart.

I plan on filling the holes 3/16" in diameter with thickened epoxy. I have to then patch the drain holes further with glass mat according to the don casey book

Sailboat Hull and Deck Repair - Google Book Search


I have a few holes 3/16" about six inches apart some 3 inches apart. How do I patch the holes that are so tiny with glass mat; i have done bigger holes but nothing this small. Anyone done this before?
Reply With Quote Share with Facebook