[JeffC_]

I''m sure that there is a Nissan part that can be ordered to fit your outboard. I have a Honda that won''t accept that generic attachment either. I used a motor stand and a 55-gal PVC barrel with the top cut off, as is described by others above, and as long as I kept the water pick-up submerged, it worked fine. If you don''t have a stand, I''m sure you could get your motor to clamp onto a sawhorse or something…<p>Spraying off the <u>outside</u> of the motor after daysails is much more important to me than flushing fresh water through the innards. I wait until the end of the season when it''s back in my garage.