SailNet Community - View Single Post - Adjusting Your Rig
View Single Post
  #14  
Old 04-24-2008
xuraax xuraax is offline
Junior Member
 
Join Date: May 2007
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
xuraax is on a distinguished road
Giu,

Sorry for getting your name wrong. This thread simply has to much info for me to appreciate all of it at one go.

I guess I was not clear enough when I asked for clarifications on the various terms. I have tried to upload a picture of the rig to clarify but for some reason Sailnet is not accepting the file.

So I will try with words.

The rig I am interested in has a twin spreader rig consisting of a wire A starting from the deck to the tip of the first spreader then to the tip of the second spreader and then on to the mast.

It also has a wire B starting from the same place as A going up at an angle to the mast at the lower spreader height.

There is a second wire C going up at an angle from the outer tip of the lower spreader to the mast at the height of the upper spreader.

I guess my question is: what are the names of wires A,B,C?

regards
Reply With Quote Share with Facebook