|
I bought a PT2 Loos gauge the other day. I have 7/32 wire on everything but the mid upper shrouds. which I believe is either 5/32 or 1/8. This is not listed as to what I need to check with current gauge. Does any one know how to figure out what the smaller wire number should be with the bigger gauge. As I really do not want to go buy a 2nd gauge for the smaller shroud.
Guessing by how the three sizes go, I should be able to halve the numbers for the 3/16 which is the smallest size for the gauge I have and work pretty close for the next size down. any one care to say I am correct, not quite right.........
I may in the end, email loos and see if they have it figured out.
Marty
__________________
She drives me boat,
I drives me dinghy!
|