SailNet Community - View Single Post - Deck hardware
Thread: Deck hardware
View Single Post
Old 07-25-2003
RichH's Avatar
RichH RichH is offline
Senior Member
Join Date: Jul 2000
Location: Pennsylvania
Posts: 2,698
Thanks: 9
Thanked 57 Times in 51 Posts
Rep Power: 15
RichH will become famous soon enough
Deck hardware

Use epoxy filled with colloidal silica powder. Use an epoxy catalyst that matches the ambient heat range, let cure (48+ hours), then heat the repair with a heat gun (without burning the repair/gel coat etc.) to complete the cure. Then redrill.
Go to the "WEST System" site for specific details: or
Reply With Quote Share with Facebook