SailNet Community - View Single Post - Removing Monitor Wind Vane Steering
View Single Post
  #2  
Old 07-30-2003
tahitisail tahitisail is offline
Junior Member
 
Join Date: Jul 2003
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
tahitisail is on a distinguished road
Removing Monitor Wind Vane Steering

"V" out the holes using a countersink bit or a larger bit.
Use some "Bondo", if you like use the more expensive MARINE FILLER and search around to get some with a hardener close to the color of your hull. Cut off the excess bondo with a sharp wood chisel and sand it smooth with a fairly fine sandpaper, being careful not to mess up the finish on the surounding area.
Reply With Quote Share with Facebook