SailNet Community - View Single Post - Yanmar 1GM10 won't start
View Single Post
  #8  
Old 05-08-2008
capn_dave's Avatar
capn_dave capn_dave is offline
Seinor Member
 
Join Date: Feb 2000
Location: Green Cove Springs, FL
Posts: 276
Thanks: 0
Thanked 1 Time in 1 Post
Rep Power: 15
capn_dave is on a distinguished road
It just might be

The battery cables. It is not uncommon for the battery cable to be bad at the terminal itself. Remove the cables from the batteries and ohm them out. We had one at the marina that would make contact and show good 12 VDC. but when you tried to start the engine the mechanical connection between the battery cable and terminal would break down.
It can drive you crazy.

Fair Winds
Cap'n Dave
Reply With Quote Share with Facebook