|
Martsmth-
There have been quite a few threads on mounting a transducer internally without cutting a hole in the hull. Be aware that it won't work if the hull is cored.
Also, be aware that you probably won't be able to plug and play the new unit to the older transducer.
BTW, you may lose some discrimination and detail by shooting through the hull.
__________________
Sailingdog
Telstar 28
New England
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this POST.
Still—DON'T READ THAT POST AGAIN.
|