SailNet Community - View Single Post - Replacing Furling Line on Hood Seafurl 810
View Single Post
  #27  
Old 06-05-2008
arf145 arf145 is offline
Irrationally Exuberant
 
Join Date: Jul 2007
Location: Northern Virginia
Posts: 1,299
Thanks: 6
Thanked 6 Times in 6 Posts
Rep Power: 7
arf145 is on a distinguished road
Knothead, I'm doing another test in my test line. Definitely my crossover looks much better now. I've stitched it and I'm at the point where I've milked everything back prior to marking for tapering. But a question (of course!): at this point in the fid's worth between where a core comes out and a cover comes out, it's thicker than normal diameter and tight, and no amount of pulling will make any more core go in, yet I've got maybe 3 fid's worth of core out at this point. Is that normal? If this is a prob, could it be because I'm working with a pretty short piece and didn't have anywhere near 5 fid's from the last mark to the slip knot?

Tom
__________________
Tom K

2000 Beneteau 331
Northern Chesapeake Bay

Ambition is a poor excuse for not having enough sense to be lazy ~ Steven Wright
Reply With Quote Share with Facebook