SailNet Community - View Single Post - New prop causes veer to port - solution??
View Single Post
  #24  
Old 06-13-2008
heinzir's Avatar
heinzir heinzir is offline
Junior Senior
 
Join Date: Jul 2000
Location: Lake Minnetonka (near Minneapolis, Minnesota)
Posts: 246
Thanks: 0
Thanked 1 Time in 1 Post
Rep Power: 15
heinzir is on a distinguished road
Quote:
Originally Posted by Brucesrq View Post
my question is on a similar track, I have a spindrift 22 with an evinrude 8.8 longshaft. the motor is mounted on the port side, and when under power it pulls port. Is there something I could do to lessen this? It makes impossible under power to do much else but steer, even for a moment. I finally bought a boat after many years of dreaming...and I have quite a learning curve aheat, but aint it sweet on the water. thanks.

Brucesrq,

Can't you just turn the outboard slightly to counteract the pull to port and lock it in this position?
__________________
Henry
Chiquita - 1974 Macgregor Venture of Newport 23

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook