If you do take this boat out, please wear a pfd. I personally would ripe it out. I ripped out a keel repair done using mat and epoxy. I replaced it with 4 layers of 6.5 oz e cloth wetting it out fully with epoxy. I also used 12 inch wide 9 oz fiberglass "tape". I then put 4 layers of epoxy over the entire bottom of the hull.
I had a dream, I was sailing, I was happy, I was even smiling. Then I looked down and saw that I was on a multi-hull and woke up suddenly in a cold sweat.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.