IMHO, it is a really bad idea. A mainsheet can get fairly highly loaded....but you are talking a pretty small boat here... What would probably be better is to make a saddle that fits over the centerboard trunk and through bolt it through then entire trunk. Another option would be to make a board that has T-nuts embedded in the bottom, and glass it to the top of the centerboard trunk. That way, the mainsheet block would be bolted to the piece that was glassed in via the t-nuts, shown below.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.