Last Thurs. I hauled our 9.2c for the first time since we bought her last fall. No blisters and there was still zink left on the shaft. Dropped the mast to install mast steps. Also the KBW10 tranny needs to be rebuilt. Hope to get her back in the water next week.
So the list goes on:
1) Bottom prep and paint
2) Tranny rebuild
3) Mast steps install
4) Dripless shaft seal
5) New zinks (including engine zinks)
6) New mast wiring
Important note: When hauling, make sure the strap is behind the prop and just in front of the skeg or too much pressure may bend the prop shaft. There's not enough room aft of the keel and forward of exposed shaft for a hauling strap.