SailNet Community - View Single Post - Bilge wiring
Thread: Bilge wiring
View Single Post
  #3 (permalink)  
Old 07-08-2008
sailingdog's Avatar
sailingdog sailingdog is offline
Telstar 28
 
Join Date: Mar 2006
Location: New England
Posts: 43,315
Rep Power: 10
sailingdog is just really nice sailingdog is just really nice sailingdog is just really nice sailingdog is just really nice sailingdog is just really nice
Alan-

A simple solution for that is to have a small positive buss bar that is wired directly to the house battery bank and allows small parasitic loads, like a bilge pump, the stereo system's memory connection, and such to run directly off the batteries. This allows you to turn off the master battery switch and still leave these loads connected. I would highly recommend that you use a small fused panel to do this, so that the individual circuits can still be properly protected against overload.

BlueSea makes a small six fuse panel with no negative ground section that would work quite nicely for this.
__________________
Sailingdog

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Telstar 28
New England

You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.

—Cpt. Mal Reynolds, Serenity (edited)

If you're new to the Sailnet Forums... please read this
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
.

Still—DON'T READ THAT POST AGAIN.
Reply With Quote Share with Facebook
Sponsored Links